Onewheels can be ridden on a variety of terrains including pavement, trails, parks and even snow. Like any other ride, they are also prone to get dirty, especially if you ride them on all kinds of terrains. So, how to clean your Onewheel properly?
Cleaning your Onewheel will not only make it look brand new again but it will also be very helpful in keeping it running smoothly. It is also a great way to prevent rust and corrosion which would ultimately increase the lifespan of your product.
In this guide, we’ll discuss the steps to clean your onewheel. So, let’s begin!
Why should you not hose down a Onewheel?
Most people believe that if a onewheel is waterproof, you can hose down it to clean the dirt. This is a misconception as many companies don’t give a warranty for water damage. Although most of the onewheels are waterproof, you shouldn’t get them wet.
A onewheel is resistant to water. You can go through puddles and wet grass on it; however, getting it completely wet isn’t a good idea. This is why it is advised not to ride a onewheel when it rains heavily.
Due to the reason mentioned above, dry cleaning a onewheel is the most effective way to clean it rather than hosing it down.
A onewheel is all electronics, and combining it with water is terrible. The components can get damaged, and many companies won’t repair them. This can be problematic, especially if you have to pay for the repair.
Steps to dry clean your Onewheel
Cleaning your Onewheel is important in keeping it in good working condition. Follow these simple steps to clean your Onewheel:
1. Cleaning the Deck And Sides
If any dirt or debris is stuck to the deck, you can use a toothbrush or other soft-bristled brush to scrub it away. After most of the debris is removed, use a damp cloth and wipe down the surface.
To clean the sides, simply wipe it with a baby wipe or soft cloth, don’t use a brush or any abrasive material as it can damage the finish of your board. Be sure not to saturate the cloth with too much water, as this could damage the electronics.
2. Cleaning the Wheel and Pads
You can use a scrub to clean the dirt from the pads. Using it gently will get rid of most of the dirt. Even If the scrub doesn’t completely remove the dirt particles, it will loosen them, which can then be further cleaned easily using compressed air.
To clean the tires, use a small amount of dish soap solution with a brush. Gently scrub the wheels until all dirt and debris are removed. Wipe them off with a damp cloth and then allow them to air dry.
Make sure that you don’t rinse the wheel directly with water as it can seriously damage the electronics.
3. Removing debris from the charging port
The charging port is an area that continuously fills up with dirt and debris. You need to clean this area because you will need to use it again and again for charging, and if this gets damaged, your onewheel would need repairing.
To remove the dirt from the port, blowing it out with the help of compressed air is the most effective way. This method is the best for doing this task, and you can quickly get the dusters that have compressed air inside them through amazon. They are cheap and easy to use.
I’ll also advise you to use a cover for your charging port as this will prevent any dirt from collecting there in the first place.
4. Using compressed air blower
Not only can you use compressed air to clean the charging port of a onewheel, but it is also the best method to remove the dust and dirt particles from other hidden areas.
Usually, after a ride on a muddy terrain or after a beach ride, your onewheel will have many particles in areas where scrubbing won’t work. For this, using compressed air will remove these particles.
These steps will clean your onewheel, but if your device needs even more cleaning, follow the next steps.
5. Using a Rubber cleaning stick
To clean your onewheel to the next level, you can use a rubber cleaning stick. Dried mud is harder to remove and if it is present on your grip tape, using a rubber cleaning stick is the solution.
These are cheap and readily available online. The stick is made of rubber, and with gentle use, the dried mud and dirt quickly come from the grip tape. With the help of this stick, you can retain the grip of your grip tape.
Make sure that you don’t go too hard while using this stick. Use it lightly on the surface and get that dirt off your grip tape.
6. Final touches with a Brush and compressed air
To finish off the cleaning, use the combination of a brush and compressed air. You can also use baby wipes to clean the fender of your onewheel.
It’s important to note that cleaning your onewheel is simple, and with the help of compressed air and scrubbing, you can get all the dirt off your onewheel. Maintaining your onewheel is necessary as this makes the onewheel look sharp and increases its longevity.
Can I use a wet rag to clean a onewheel?
Yes, you can use a wet rag, but remember that water shouldn’t be dripping from it. It is vital to prevent water damage to your onewheel.
Water and electronics do not share a good bond, and you don’t want your onewheel to get damaged. It’s a considerable investment, so take each step carefully.
Final words
Buying a onewheel might be easy for some, but maintaining it can be challenging. You have to make sure that you clean your device regularly and carefully. This will increase its performance and durability, which will benefit you in the long run.
Make sure to prevent directly hosing down your onewheel. Make sure to dry, clean it properly and enjoy the rides.
